Advantech i915GV-INA Series User Manual page 14

2. Press the load lever with your thumb (A), then move it to the left (B) until it is
released from the retention tab.
Retention tab
Load lever
To prevent damage to the socket pins, do not remove the PnP cap unless you
are installing a CPU.
3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lif t the load plate with your
thumb and forefinger to a 100º
angle (A), then push the PnP
cap from the load plate window
to remove (B).
5. Position the CPU over
the socket, making sure
that the gold triangle
is on the bottom-lef t
corner of the socket.
The socket alignment
key should fit into the
CPU notch.
i915GV-INA
A
B
Load plate
Alignment key
Gold triangle mark
PnP cap
This side of the socket box
should face you.
B
A
1-7