Advantech i915GV-INA Series User Manual page 49

IDE Primary Master/Slave PIO [Auto]
This option lets you set a PIO (Programmed Input/Output) mode for the IDE
device. Modes 0 through 4 provide successive increase in per formance.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
IDE Primary Master/Slave UDMA [Auto]
Ultra DMA capability allows improved transfer speeds and data integrity for
compatible IDE devices. Set to [Disabled] to suppress Ultra DMA capability.
Configuration options: [Disabled] [Auto]
On-Chip Serial ATA [Auto]
Setting to [Disabled] disables the onchip Serial ATA controller.[Auto] lets the BIOS
auto-configure. [Combined Mode] enables PATA and SATA, with a maximum of
two IDE drives in each channel. [Enhanced Mode] enables both PATA and SATA,
supporting a maximum of six IDE drives. [SATA Only] enables SATA to operate in
legacy mode. Configuration options: [Disabled] [Auto] [Combined Mode] [Enhanced
Mode] [SATA only]
On-Chip Frame Buffer Size
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Azalia Audio Select
Onboard LAN Device
Onboard Sec LAN Device
Onboard Lan Boot ROM
Onboard Sec Lan Boot ROM
: Move Enter:Select
F5: Previous Values
On-Chip Frame Buffer Size [8MB]
This feature controls the amount of system memory that is allocated to the
integrated graphics processor when the system boots up. Configuration options:
[1MB] [8MB]
USB Controller [Enabled]
Select [Enabled] if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. Configuration options: [Enabled] [Disabled]
i915GV-INA
Phoenix - Award BIOS CMOS Setup Utility
Onboard Device
[8MB]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
+/-/PU/PD:Value
F6: Fail Safe Defaults
Item Help
Menu Level
F10:Save ESC:Exit
F7: Optimized Defaults
F1:General Help
2-11