Installing The Cpu Heatsink And Fan - Advantech i915GV-INA Series User Manual

1.3.2

Installing the CPU heatsink and fan

Pentium
®
The Intel
and fan assembly to ensure optimum thermal condition and performance.
When you buy a boxed Intel
•
includes the CPU fan and heatsink assembly. If you buy a CPU separately,
make sure that you use only Intel
fan.
Your Intel
•
push-pin design and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure
•
that you have properly applied Thermal Interface Material to the CPU
heatsink or CPU before you install the heatsink and fan assembly.
Make sure that you have installed the motherboard to the chassis before you
install the CPU fan and heatsink assembly.
To install the CPU heatsink and fan:
1. Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the holes
on the motherboard.
Or ient the heatsink and fan
assembly such that the CPU fan
cable is closest to the CPU fan
connector.
Make sure to orient each fastener with the narrow end of the groove pointing
outward. (The photo shows the groove shaded for emphasis.)
i915GV-INA
4 LGA775 processor requires a specially designed heatsink
®
Pentium 4 LGA775 heatsink and fan assembly comes in a
® ®
Narrow end
of the groove
Pentium
® ®
4 processor, the package
-certified multi-directional heatsink and
®
Fastener
Motherboard hole
1-9