Power Management Setup - Advantech i915GV-INA Series User Manual

2.6

Power Management Setup

The Power Management Setup menu items allow you to change the settings for
the Advanced Power Management (APM) and Advanced Configuration and Power
Interface (ACPI).
ACPI Function
ACPI Suspend Type
Soft-Off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Resume by Alarm
x Date(of Month) Alarm
x Time(hh:mm:ss) Alarm
POWER ON Function
Hot Key Power ON
: Move
F5: Previous Values
ACPI Function [Enabled]
Enables or disables ACPI function. Configuration options: [Enabled][Disabled]
ACPI Suspend Type [S1(POS)]
Allows you to select the ACPI state used for system suspend.
Configuration options: [S1(POS)] [S3(STR)] [S1&S3]
Soft-Off by PWR-BTTN [Instant-Off]
Select [Instant-Off], power will be off instantly. Select [Delay 4 Sec], power will be
off by pressing button 4 seconds. Enter suspend if button is pressed less than 4
seconds.
Wake-Up by PCI Card [Enabled]
Enables or disables system wake-up by PCI card. Configuration options:
[Enabled][Disabled]
Power On by Ring [Enabled]
An input signal on the serial Ring Indicator (RI) line awakens the system from a
soft off state. Configuration options: [Enabled][Disabled]
2-14
Phoenix - Award BIOS CMOS Setup Utility
Power Management Setup
[Enabled]
[S1(POS)]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
0
0 : 0 : 0
[BUTTON ONLY]
[Ctrl-F1]
Enter:Select +/-/PU/PD:Value
F6: Fail Safe Defaults
Item Help
Menu Level >
F10:Save ESC:Exit
F7: Optimized Defaults
Chapter 2: BIOS setup
F1:General Help