Venting Arrangements; With Co-Linear Flex System - Regency B36XT Bellavista Owners & Installation Manual

THE APPLIANCE MUST NOT BE
CONNECTED TO A CHIMNEY FLUE
SERVING A SEPARATE SOLID FUEL
BURNING APPLIANCE.
This appliance is designed to be attached to
two 3" (76mm) co-linear aluminium fl ex running
the full length of the chimney. See the Venting
Arrangements on next page for minimum and
maximum heights.
Required Parts:
Part # Description
946-529 Co-linear DV Vertical
Termination Cap
948-305 3" Flex - 35 ft.
946-563 Co-Axial to Co-Linear Adapter Kit
which contains the following:
Co-linear Flex Adapter
Outer Pipe
Inner Pipe Adapter
770-994 Rigid Pipe Adaptor
946-606 Vent Reducer
Alternate Approved Caps
46dva-VC Vertical Termination Cap
46dva-VCH High Wind Cap
46dva-GK 3" Co-linear Adapter with fl ashing
NOTE:
See detailed venting arrangements,
vertical terminations, co-linear fl ex system
into masonry fi replaces in this manual.
Regency Bellavista™ B36XT Gas Fireplace

VENTING ARRANGEMENTS

WITH CO-LINEAR FLEX SYSTEM

Masonry chimneys may take various contours which the fl exible liner will accommodate. However,
keep the fl exible liner as straight as possible, avoid unnecessary bending.
The Air Intake pipe must be attached to the inlet air collar of the termination cap.
with Kit#
946-563
Pipe Length
Reducer #946-606
(4 x 6-5/8 venting)
Rigid Pipe Adapter
# 770-994
Co-linear DV
Vertical Termination
Cap # 946-529
A maximum
of two certified
joiner kits
may be used
per length.
#948-305 (35 ft)
Exhaust
Flue
Outer
Pipe
90 Degree
Elbow
Inner Pipe
Adapter
with Kit#
946-563
INSTALLATION
Flex Liner
Air Intake
Co-Linear
Flex
Adapter
with Kit#
946-563
33