Si-71A
1.5
Removal of Decoration Cover
Procedure
Step
1
To remove the decoration
cover, pull the inside part
(suction grille side) down.
2
Disengage the strap (fall
prevention strap) of the
corner decoration cover from
the pin.
3
There are four corner
decoration covers. They can
be removed by following the
same procedure.
Removal Procedure
Warning
Be sure to turn off all power supplies before disassembling work.
Procedure
For FHYC71K
Points
∗Installation of the corner decoration
cover
Install the corner decoration cover so
that the four protrusions on the cover
are securely inserted into the holes on
the decoration panel section.
131