Table of Contents
Advertisement
Si-71A
Step
3) Remove the ambient air
thermistor.
2
Disconnect the motor
operated valve coil, and
crank case heater
connectors from the PC
board.
3
Remove the electrical parts
box installation screw.
4
Remove the electrical parts
box by pulling it toward
yourself and lifting.
Removal Procedure
Procedure
For R(Y)71K
Points
Note :
If not dismounting the rear/side casing,
remove the 2 screws of the electrical
parts box.
Caution
Be careful of the lead wire protruding
from the rear surface of the electrical
parts box.
185
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
