Auto Run - CipherLab 9600 Reference Manual

9600 Mobile Computer

2.6 AUTO RUN

Upon hardware or software reset, the OS shall automatically execute AutoRun.exe
and/or AutoRun.ini if any of the two files can be found in the "\DiskOnChip" folder.
If AutoRun.exe exists
Upon cold boot, the OS shall automatically execute AutoRun.exe
Upon warm boot, the OS shall automatically execute AutoRun.exe
If AutoRun.ini exists
Upon cold boot, the OS shall automatically check the contents of AutoRun.ini and execute
them (if there is any).
Any line prefixed with a semicolon ";" is supposed to be a comment line only; otherwise it is
an executable file or command and shall be executed (line by line). For example,
\DiskOnChip\cerdisp.exe
:\DiskOnChip\ReaderConfig.exe
;\DiskOnChip\RF9600_CE.exe
\DiskOnChip\cerdisp.cab
:\DiskOnChip\ReaderConfig.cab
Upon warm boot, the OS shall automatically check the contents of AutoRun.ini and execute
any line that is prefixed with a colon ":".
Any line prefixed with a semicolon ";" is supposed to be a comment line only. For example,
:\DiskOnChip\ReaderConfig.exe
;\DiskOnChip\RF9600_CE.exe
:\DiskOnChip\ReaderConfig.cab
Note: Because the cabinet files are designed to install the application, tidy up, and then
"self destruct", they will be automatically deleted from your mobile computer after
installation. However, AutoRun.ini will backup the original files (.cab) while
installing cabinet files, and restore them after installation. Consequently, these
cabinet files will be automatically re-installed to your mobile computer upon cold
boot or warm boot, if specified in AutoRun.ini.
50
Reference Manual