Changing Camera Settings - CipherLab 9600 Reference Manual

9600 Mobile Computer

8.4.3 CHANGING CAMERA SETTINGS

Tap to configure camera settings if necessary.
Camera/Capture Settings
Resolution
Flash Light
Feature
Image Format
EV
Time stamp
Default image store
152
Reference Manual
Options
By default, "1600 x 1200" pixels resolution is in use.
"800 x 600" pixels resolution is supported.
By default, the flash light is "Force off".
Force on, Force off and Auto are supported. If you want to save
battery power or ambient light is enough, you may turn it off.
By default, no special effect is applied.
Monochrome, Sepia, Negative, Solarize (with unmodified UV), and
Solarize 2 (with UV) are supported.
By default, the captured image will be saved in JPEG format.
Bitmap format is supported.
By default, the exposure value is 5.
The exposure value is for the camera to determine the exposure
factors. The greater the value is, the brighter the pictures
becomes. You may choose a value from 0~9.
By default, no time stamp is applied. When applied, information on
date and time will be added on top of the captured image in the
format of YYYY/MM/DD HH:MM:SS, such as 2010/01/04 11:13:13.
By default, the captured image is stored under the directory
"\DiskOnChip\pics"
HHMMSS_YYMMDD.bmp.
If you want to change the directory, tap
in the format of HHMMSS_YYMMDD.jpg
.
or