Gsm/Gprs Manager; Basic Settings - CipherLab 9600 Reference Manual

9600 Mobile Computer

6.4 GSM/GPRS MANAGER

Go to Start | Settings | Control Panel and double-tap GSM/GPRS Manager.
Note: Make sure the GSM/GPRS power is turned off while configuring the following
settings. All settings configured here will not take effect until the GSM/GPRS power
is restarted through Power Management.

6.4.1 BASIC SETTINGS

Select to use GSM or GPRS service after turning on the power to the GSM/GPRS module.
When GPRS is selected, available settings on this tab are:
Options
Enable GPRS
auto-connection
Retry GPRS
connection
Tap [Apply] to save the current settings, or tap [Reset to Default] to restore defaults.
122
Reference Manual
Description
Decide whether to automatically maintain GPRS connection when the
mobile computer resumes from suspend mode.
Set the number of retry attempts and interval for the mobile computer
to connect to a GPRS network till successful connection.