CipherLab 9600 Reference Manual page 195

9600 Mobile Computer
Select JPEG Size
Bits per Pixel
Default image store
Note: (1) For JPEG files, these BPP settings are ignored for it always uses 8 bits per pixel!
(2) When the image capture feature is enabled, press the [SCAN] button and it will
capture an image instead of reading a barcode.
Miscellaneous Options
Transmit Code ID
182
Reference Manual
Set a value from 5 to 150, which represents the file size in
multiples of 1024 bytes (1K). For example, setting this
value to 8 permits the file size to be as large as 8192
bytes.
Select the number of significant bits per pixel (BPP) to use
when capturing an image.
1 bit per pixel (for black and white images)
4 BPP (to assign 1 of 16 levels of grey to each pixel)
8 BPP (to assign 1 of 256 levels of grey to each pixel)
By default, the captured image is stored under the
directory "\DiskOnChip\images" in the format of YYMMDD
HHMMSS.jpg or YYMMDDHHMMSS.bmp.
If you want to change the directory, tap [Browse].
Decide whether to include AIM Code ID in the beginning of
data. Each AIM Code ID contains the three-character string
"]cm" –
] = Flag Character (ASCII 93)
c = Code Character (see below)
m = Modifier Character (see below)
40
8
\DiskOnChip\
images
---
Disable