Software Reset (Warm Boot); Hardware Reset (Cold Boot); Date/Time & Time Zone After Reset - CipherLab 9600 Reference Manual

2.5.2 SOFTWARE RESET (WARM BOOT)

Software reset, also known as a warm boot, will restart the mobile computer and keep all
the saved files.
Software Reset (= Warm Boot)
Use the stylus to press the [Reset] button.
During operation, the removal of main battery will start software reset too.
Warning: Data loss may occur when files are not properly closed before software
reset.

2.5.3 HARDWARE RESET (COLD BOOT)

Hardware reset, also known as a cold boot, will restart the mobile computer and
initializes SDRAM. Data and program files stored in SDRAM will be erased after hardware
reset. But you can restore data that is previously synchronized with your computer by
performing an ActiveSync operation, or backed up by using CipherLab Backup Utility.
Cold Boot
Press [Power] and [Reset] button at the same time for about 2 seconds.
Warning: Only the files stored in the Flash File System are retained during hardware
reset.
2.5.4 DATE/TIME & TIME ZONE AFTER RESET
System Reset
Software Reset
Hardware Reset
Note: You must manually adjust system date and time after hardware reset.
We suggest you to check the time zone as well.
Registry File Settings After Reset
Date/Time Keep the current settings (= No restore occurs!)
Time Zone Restored from Sysbak folder if backup file is available
Keep the current settings if backup file is unavailable
Date/Time Restored to system default:
Time Zone Restored from Sysbak folder if backup file is available
Restored
unavailable:
Chapter 2 Learning Windows CE Basics
2010/1/1 00:00
to system
(GMT-08:00) Pacific Time (US & Canada)
default if backup file is
49