Propane Gas Fires; Pack Contents - Valor 956 Installer And Owner Manual

4.12 Propane gas fires.

Propane gas appliances must not be installed in a room, which is built entirely below
ground level (See BS 5871 Pt2).
Items below with a letter reference are supplied on a film wrapped card.
Remove all the items carefully to prevent damage. Take special care when handling
the ceramic components. Some items may be contained in the packaging fitments -
Examine the packaging carefully before discarding. Check that all the items are
present and undamaged.
1 Loose parts pack including: -
4 'A' screws (No.8 x 6)
6 'B' screws (No. 8 x 10)
2 'C' screws (M4 x 10)
2 'D' screws (M5 x 10)
2 'F' Cable adjusters
1 'G' Inlet 'T' connector / elbow including pressure test point, nut and olive.
1 'H' Grommet for rear of hotbox.
4 'I' Wall plugs
4 'J' Screw eyes.
1 Hotbox and burner assembly
1 Burner tray trim
1 Length of self-adhesive foam seal
2 Fire retaining cables
1 Flue restrictor
1 Strip of floor sealing tape
1 Ceramic fuel effect
1 Fascia / Fascia & firefront
1 Literature pack.
©
GDC Group Ltd 2014
INSTALLER GUIDE

5. PACK CONTENTS

Page 18