General Installation Requirements; Regulations, Standards And Law - Valor 956 Installer And Owner Manual

Inset live fuel effect gas fire
Table of Contents

Advertisement

The conversion of net efficiency to gross was achieved by multiplying the net
efficiency by the following conversion factor from Table E3 of SAP 2005, rounding
down to the nearest whole number.
Gas
Natural Gas
LPG

4. GENERAL INSTALLATION REQUIREMENTS

4.1 Regulations, Standards and Law.

The installation must be in accordance with these instructions.
For the user's protection, in the United Kingdom it is the law that all gas appliances
are installed by competent persons in accordance with the current edition of the Gas
Safety (Installation and Use) Regulations. Failure to install the appliance correctly
could lead to prosecution. GAS SAFE REGISTER and CORGI require their members
to work to recognised standards.
In the United Kingdom the installation must also be in accordance with:
All the relevant parts of local regulations.
All relevant codes of practice.
The relevant parts of the current editions of the following British Standards:-
BS EN 1856 Part 1 -
BS 715 -
BS EN 1858 -
BS EN 1806 -
BS 5440 Part 1 -
BS 5440 Part 2 -
BS 6461 Part 1 -
BS 1251 -
BS 5871 Part 2 -
BS 6891 -
In England and Wales, the current edition of the Building Regulations issued by the
-
Department of the Environment and the Welsh Office.
In Scotland, the current edition of the Building Standards (Scotland) Regulations
-
issued by the Scottish Executive.
In Northern Ireland, the current edition of the Building regulations (Northern Ireland)
-
issued by the Department of the Environment for Northern Ireland.
©
GDC Group Ltd 2014
INSTALLER GUIDE
Conversion factor from net to gross efficiency
Chimneys - Requirements for metal chimneys.
Specification for metal flue boxes for gas-fired appliances not
exceeding 20kW.
Chimneys - Components - Concrete flue blocks.
Chimneys - Clay / ceramic flue blocks.
Installation of flues.
Installation and maintenance of flues and ventilation for gas
appliances of rated input not exceeding 70 kW net (1st, 2nd
and 3rd family gases).
Masonry chimney & flues - Installation
Fireplace components
Installation - Inset LFE gas fires
Gas pipework installation
Page 10
0.901
0.921

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents