SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
4.2 Errors Shown on the Display
4.2.1 User error message
Look for the applicable error message and execute the appropriate countermeasures.
"BUSY/NO SIGNAL" (#005/#018)
Cause:
Solution:
Cause:
Solution:
Cause:
Solution:
Cause:
Solution:
Cause:
Solution:
"C INK EMPTY"
Cause:
Solution:
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
The receiving fax did not answer within 55 seconds. (T1 timer over)
Contact the other party and have them check their fax.You can try to send the
document manually. For an overseas call, add pauses to the registered number.
The touch tone/rotary pulse setting on your fax is incorrect.
Set your fax to the setting that matches your telephone line.
The other party is not using a G3 machine.
Contact the other party and have them send or receive the document using a G3
machine.
The other party's fax is not working.
Contact the other party and have them check their fax.
The telephone number you dialed is busy.
Try sending the document at a later time.
The Cyan ink tank in the BJ cartridge is empty.
Replace the Cyan ink tank.
4-12