Canon SmartBase MPC600F Service Manual page 73

SmartBase MPC600F/MPC400 Chapter 3: Assembly and Disassembly
Disassembly 102. SCNT board, Power supply unit
(1) Perform Disassembly 101.
(2) Disconnect all the cables from the SCNT board.
(3) Remove the 4 screws (a), and detach the 4 grounding wires.
(4) Remove the 3 screws (b), and detach the SCNT holder.
(5) Remove the power supply cover.
(6) Remove the cable (c) from the SCNT board.
(7) Remove the 5 screws (d), and detach the SCNT board from the SCNT holder.
(8) Remove the 2 screws (e), and detach the power supply unit from the SCNT holder.
a
b
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Power supply cover
d
SCNT
d
board
d
Power supply unit
e
c
SCNT holder
Figure 3-25 Disassembly 102
b
a
3-28