How To Clean Part - Canon SmartBase MPC600F Service Manual

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
2. HOW TO CLEAN PARTS
2.1 Main Unit Outer Covers
Wipe with a dry, soft cloth.
2.2 Pickup/Separation Roller (SmartBase MPC600F only)
Open the ADF cover, and wipe with a dry, soft cloth.
2.3 Document U-Turn/Feed/Eject Roller (SmartBase MPC600F only)
Open the ADF cover, and wipe with a dry, soft cloth.
2.4 Separation Guide (SmartBase MPC600F only)
Open the ADF cover, and wipe with a dry, soft cloth.
2.5 Document Guide Sheet (SmartBase MPC600F only)
Open the ADF ass'y, and wipe with a dry soft cloth.
2.6 White Sheet (SmartBase MPC600F only)
Open the ADF ass'y, and wipe with a dry soft cloth.
2.7 Document Glass
Open the pressure plate or ADF ass'y, and wipe with a dry soft cloth.
2.8 Printer Platen
Open the flatbed ass'y, and wipe with a cloth moistened with a little water.
NOTE
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
If the parts above are very dirty, wipe with a cloth moistened with IPA (isopropyl
alcohol).
Do not use tissue paper. Dust from the tissue paper causes static electricity.
Precautions when Using IPA
When cleaning with IPA, take care to prevent the IPA from splashing high-temperature
parts. If IPA splashes high-temperature parts, leave for at least three minutes to allow
the IPA to evaporate.
4-4