Canon SmartBase MPC600F Service Manual page 143

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
b) G3 signal transmission test
The G3 signal transmission test menu is selected by pressing the 4 button from the MODEM NCU test
menu. The G3 signals below are sent from the modem using the modular jack and the speaker. The
frequency can be changed with the numeric buttons.
Numeric button
0
1
2
3
4
5
6
7
8
NOTE
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Frequency
300 bps
2400 bps
4800 bps
7200 bps
9600 bps
TC7200 bps
TC9600 bps
12000 bps
14400 bps
The transmission level for each frequency follows the service data.
4-64