Canon SmartBase MPC600F Service Manual page 111

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
5.2 Service Data Setting
Service data can be checked and changed with items on display menus. The default values of the SSSW/
parameters available in this fax machine are shown in this Chapter, 5.2.3 Service data setting in this
manual. The SSSW/parameters given in the previous product-specific manual are explained in the G3
Facsimile Service Data Handbook . The new switches for this model are described in this Chapter,
5.2.3 Service data setting .
5.2.1 Service data overview
The service data menu items are divided into the following nine blocks.
#1 SSSW (Service soft switch settings)
These setting items are for basic fax service functions such as error management, echo
countermeasures, and communication trouble countermeasures.
#2 MENU (MENU switch settings)
These setting items are for functions required during installation, such as NL equalizer and transmission
levels.
#3 NUMERIC Param. (NUMERIC parameter settings)
These setting items are for inputting numeric parameters such as the various conditions for the FAX/
TEL switching function.
#4 NCU (NCU settings)
These setting items are for telephone network control functions such as the selection signal transmission
conditions and the detection conditions, for the control signals sent from the exchange.
#5 TYPE (TYPE setting)
The type setting makes the service data conform to a specific country communications standards. There
is only one setting item in this block.
#6 GENESIS (UHQ function setting)
These setting items are for scanned image processing such as edge enhancement and error diffusion
processing.
#7 PRINTER (PRINTER function settings)
These setting items are for basic printer service functions such as the reception picture reduction
conditions. Also there is an item for resetting the printer section without switching the power off-on.
#8 CLEAR (Data initialization mode)
Various data are initialized by selecting one of these setting items. There is a setting item for checking/
inputting the total number of pages printed and total number of pages scanned by this fax.
#9 ROM (ROM management)
ROM data such as the version number and checksum are displayed.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
4-32