When Adjustment Of The Print Head Position Is Required - Canon SmartBase MPC600F Service Manual

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service

3.2 When Adjustment of the Print Head Position is Required

a) Overview
When replacing the print heads, the point of ink ejection may be off, preventing clean characters,
depending on the state in which BJ cartridge is installed. In order to eliminate this drift, it is necessary to
adjust the head position after attaching the BJ cartridge. Set 2 or more sheets of normal paper sized A4 or
LTR on the Auto Sheet Feeder, and perform head position adjustment following the steps in Fig. 4-5.
Figure 4-3 Print Position Adjustment Pattern
4-7
Download Service Manual And Resetter Printer at http://printer1.blogspot.com