Canon SmartBase MPC600F Service Manual page 163

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
Header
TX/RX NO
CONNECTION TEL
(OTHER PARTY)
SUBADDRESS
CONNECTION ID
START TIME
USAGE TIME
PAGES
RESULT
MAKER CODE
RCV V.8 FRAME
SYMBOL RATE
DATA RATE
TX LVL REDUCTION : 0 (Fixed)
ERR ABCODE
ERR SECTXB
ERR SECRXB
RX/TX
NOTE
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Figure 4-40 Service Error Activity Report (receiving)
: OK, NG messages
: Indicates four digits of the transaction number
: Number sent from the other party or number dialled
(lower 20 digits)
: Subaddress number sent from the other party
: ID sent from the other party, if the other party is a Canon fax
: Communication start date time (on 24-hour display)
: Communication time (in minutes and seconds)
: Number of pages for which transmission was complete
(For details, see User's manual )
: "NG" display with number of pages for which
transmission was fault, and service error code
: Maker code
[1000 1000]
: Received V.8 protocol signal
: Symbol rate used for the primary channel
: Transmission speed used for the primary channel
: Code output by the modem when an error occurred (Not used in the field)
: Transmit status of the modem when an error occurred
(Not used in the field)
: Receive status of the modem when an error occurred
(Not used in the field)
: Received/transmitted protocol signal
bit 1 to bit 96 of received/transmitted DIS, DCS, or DTS
The V.8/V.34-related items (RCV V.8 FRAME to ERR SECRXB) are not printed on the
Normal G3 Service Activity Report.
Indicates a Canon fax
lower nibble
upper nibble
4-84