Enter Configuration
Ì$+;Î
Read the above code.
(Code Identifiers default to Datalogic standard, see table on previous page).
Select the code type from the code table in Appendix
You can define 1 or 2 identifier characters for each code type. If only 1 identifier character is required, the second character must be
selected as FF (disabled). Read the hexadecimal value corresponding to the character(s) you want to define as identifiers for the
code selected in step : valid characters are in the range 00-FD.
Example:
To define Code 39 Code Identifier = @
44
DATA FORMAT
CUSTOM CODE IDENTIFIER
define custom code identifier(s)
B
define custom code identifier(s)
ÌEH/Î
Read
ÌEH/Î
for the identifier you want to change.
Code 39
ÌVWÎ
+
Exit and Save Configuration
Ì$-?Î
+
40
+
FF
PowerScan™ BT8300 Family