Enter Configuration
Ì$+;Î
After selecting one of the desired Header codes, read the character(s) from the HEX table. Valid characters are in the range 00-FE. For
Wedge and USB-KBD interfaces, it is also possible to read the Special Key(s) on page 49.
Read
For more details see par. 5.3.1 and par. 5.3.2. See also "Message Formatting" in par. 6.1 and 6.2.
46
DATA FORMAT
READER HEADER
no header
two character header
four character header
six character header
eight character header
Four character header
41 + 42 + 43 + 44
+
three character header
seven character header
Example:
Hex codes
=
Exit and Save Configuration
Ì$-?Î
one character header
five character header
Header
ABCD
PowerScan™ BT8300 Family