Custom Code Identifier - Datalogic GRYPHON Dx30 Reference Manual

Enter Configuration
Ì$+;Î
Rea d the above code.
(Cod e Identifiers default to Datal
Select the code type from
change.
You can define 1 or 2 identifier characters fo
requ ir ed, the second characte
value corresponding to the c
sele cted in step
interfaces, it is also possible to read the Special Key(s) on page 67.
Example : To define Code 39 Co
Read
64
DATA FORMAT
C
USTOM
define custom code identifier( )
ogic standard, see table on previous page).
th e code table in Appendix
r must be selected as FF (disabled). Read the hexadecimal
haracter(s) you want to define as identifiers for the code
: valid characters are in the range 00-FD. For Wedge and USB-KBD
de Identifier = @
define custom code identifier(s)
ÌEH/Î
C I
ODE DE NTIFIER
ÌEH/Î
r each code t
Code 39
ÌVW
+
Exit and Save Configuration
Ì$-?Î
s
B
for t e identifier you want to h
ype. If only 1 identifier character is
Î
+ 40 + FF