Table of Contents
Advertisement
Enter configuration
Read the above code.
(Code Identifiers default to Datalogic Standard, see table on previous page).
Select the code type from the code table in Appendix B for the identifier you want to
change.
You can define 1 or 2 identifier characters for each code type. If only 1 identifier character is
required, the second character must be selected as FF (disabled). Read the hexadecimal
value corresponding to the character(s) you want to define as identifiers for the code
selected in step
To define Code 39 Code Identifier = @
Example:
Read
68
DATA FORMAT
C
USTOM
define custom code identifier(s)
: valid characters are in the range 00-FE.
define custom code identifier(s)
C
I
ODE
DENTIFIER
Code 39
+
Exit & Save configuration
+
+
40
FF
Advertisement
Table of Contents
