Enter Configuration
Ì$+;Î
caps lock OFF
ÌFE0ZÎ
NOTE: Caps lock manual configuration is ignored when Caps Lock Auto-Recognition is enabled.
For PC Notebook interface selections, the caps lock status is automatically recognized; therefore this command is not necessary.
CAPS LOCK AUTO-RECOGNITION (IBM AT COMPATIBLE ONLY)
ÌFP0pÎ
toggle num lock
ÌFL1kÎ
This selection is used together with the Alt Mode interface selection for AT or Notebook PCs.
It changes the way the Alt Mode procedure is executed; therefore it should be set as follows:
if your keyboard Num Lock is normally on use num lock unchanged
if your keyboard Num Lock is normally off use toggle num lock
In this way the device will execute the Alt Mode procedure correctly for your application.
Product Reference Guide
Select the appropriate code to match your keyboard caps lock status.
disable
INTER-CHARACTER DELAY
delay between characters transmitted to Host
Read 2 numbers from the table where:
00 = DELAY disabled
01-99 = DELAY from 1 to 99 milliseconds
delay disabled
WEDGE
CAPS LOCK
NUM LOCK
ÌCK3Î
Exit and Save Configuration
Ì$-?Î
caps lock ON
ÌFE1]Î
enable
ÌFP1sÎ
num lock unchanged
ÌFL0hÎ
33