Datalogic PowerScan BT8300 Product Reference Manual page 24

™
POWERSCAN BT8300
Linking to a PC in HID
To link a PowerScan BT8300 reader in HID to a Bluetooth-enabled PC, please read the following bar codes in the given
sequence:
1.
2.
3.
4. Use the host computer's Bluetooth Manager to "Add Bluetooth Device Wizard" and select "PowerScan BT8300."
In the next window, enter the PIN code if you are using Security Mode 2 or Security Mode 3, or choose "Don't
use passkey" if you set Security Mode 1.
The default Security Mode in HID mode is mode 1 - Authentication and Encryption Disable.
bar
NOTE
5. Four ascending beeps will be emitted, signaling that the PowerScan BT8300 has been successfully connected to
the Bluetooth-enabled PC.
END of procedure. YOUR READER IS NOW READY TO READ CODES.
18
Enter Configuration
Ì$+;Î
HID Profile
Exit and Save Configuration
Ì$-?Î
PowerScan™ BT8300 Family