Table of Contents
Advertisement
7.3 System CONFIGURATION
Max number of devices per base station
7.4 Status Indicators
The scanner has two indicator LEDs and a Beeper. The BC-8000 and C-8000 cradles have four LED indicators (three for
BC-8010 model) and a Beeper. They signal several operating conditions, which are described in the tables below.
POWERSCAN™ BT8300 READER START-UP
¹
Beeper
L L L L
H H H H
long tones
H L H L
POWERSCAN™ BT8300 READER CONFIGURATION
Beeper¹
H H H H
L
L L L
POWERSCAN™ BT8300 READER DATA ENTRY
Beeper¹
one beep²
H L long
H long
H H H
H H long
¹ Only the Beeper Intensity command can modify these signals.
² The data entry good read tone is user-configurable with all the Beeper commands in the Reading Parameters section.
For M-series readers, normally this results in two beeps; the first indicates that the reader has decoded the code, the
second indicates whether BC 8030-BT has received the data. See also par. 5.8.2.
Product Reference Guide
System Configuration
H = high tone
Meaning
Parameters loaded correctly
Parameter loading error, reading or writing error in the non volatile memory
Hardware error in EEPROM
Meaning
Correct entry or exit from Configuration mode
Good read of a command
Command read error
LED
Good Read
Spot
ON
ON
ON
ON
OFF
OFF
L = low tone
Meaning
Correct read of a code in normal mode
TX error between PowerScan™ BT8300 and BC-
8030-BT
Successful advanced format concatenation
Timeout expired – operation not completed
Error in advanced data formatting
Ready to read a code
TECHNICAL FEATURES
BC 8030-BT
4
157
- Quick Links:
- Connection
Hide quick links:
Advertisement
Table of Contents
