Datalogic PowerScan BT8300 Product Reference Manual page 132

Enter Configuration
Ì$+;Î
This feature allows the insertion of a separator between QTY/CODE pairs.

 Read the above code.
 Select the length of the separator you want to insert by scanning a barcode (1 – 8) from the Hex Numeric table in the back of this
manual.
 Define the separator string using a sequence of four hex ascii codes from the table at the back of this manual.
Read
For more information on this feature see "Message Formatting" starting in par. 6.1 and 6.2.
This function defines how a scanned barcode interacts with a pre-edited CODE field, or with a string entered by a pre-programmed
FUNC KEY.
Options are:
0. Barcode data overwrites what is written in the CODE field by keyboard and the code is transmitted;
1. Barcode data is appended to any text in the CODE field and the code is transmitted;
2. Barcode data is appended to any text in the CODE field but the code IS NOT transmitted. Data is transmitted when the enter key is
pressed.
NOTE: Option 2 allows the addition of a footer to the scanned barcode ('just in time formatting').
 0verwrite CODE and
Append to CODE,
126
16-KEY DK MODEL PARAMETERS
QTY/CODE SEPARATOR
Example: To define QTY/CODE separator =
Define QTY/CODE
length
separator
+ 1
transmit
don't transmit
 Disable – no separator
define QTY/CODE separator
Hex codes
+ 20 + 20 + 3A + 20
APPEND CODE
Exit and Save Configuration
Ì$-?Î
:
(colon)
Text string
:
=
space space space
Append to CODE and
transmit
PowerScan™ BT8300 Family