™
POWERSCAN
BT8300
5.11 Configuration Editing Commands
The following commands carry out their specific function and then exit the configuration environment.
Command
Ì$+$*oÎ
Ì$+$!KÎ
Ì$+$&_Î
Ì$+RX0$-qÎ
Ì$+RX1$-vÎ
Ì$+RX2$-{Î
5.12 Custom Default Configuration
Read the following code to set the reader user-defined configuration as custom default configuration:
Read the following code whenever you need to restore the custom default configuration:
146
Restore PowerScan™ reader default configuration (see the relative Quick
Reference Guide for default settings)
Transmit the PowerScan™ BT8300 software release.
Transmit PowerScan™ reader configuration in ASCII format.
This command is not effective with Pen emulation interface.
Restore BC 8030-BT default configuration (see the relative Quick Reference Guide
for default settings)
Transmit the BC 8030-BT Software release.
Transmit BC 8030-BT configuration in ASCII format. This command is not effective
with Pen Emulation interface.
Save User-defined Configuration as Custom Default
Ì$+$0ÂÎ
Restore Custom Default Configuration
Ì$+$1$Î
Description
PowerScan™ BT8300 Family