Datalogic PowerScan BT8300 Product Reference Manual page 21

Link by Label
1.
2.
3.
4.
5.
6. Four ascending beeps will be emitted, signaling that the PowerScan BT8300 has been successfully connected to
the BC 8030-BT Cradle and the Green LED
END of procedure. YOUR READER IS NOW READY TO READ CODES.
Another way to link the PowerScan™ BT8300 to the BC 8030-BT Cradle with the Link by Label
method can be to create a label that includes the appropriate command and the cradle MAC address.
Please refer to the Bluetooth Parameters Reference in this Product Reference Guide (PRG), or
NOTE
contact Technical Support for more information.
Linking the PowerScan BT8300 to a Bluetooth-Enabled PC
The PowerScan BT8300 reader can optionally be linked to a Bluetooth-enabled host with the serial port profile (SPP) or
human interface device (HID) as a virtual keyboard.
Depending on the driver used by your device, specific actions may be required the first time a
connection is made between the PowerScan PBT8300 and a generic Bluetooth peripheral. For further
information, download "Initial Bluetooth Connection Guide," available on the Datalogic website in the
NOTE
PowerScan BT section.
Product Reference Guide
Enter Configuration
Ì$+;Î
Handheld - Cradle
Cradle Address
Read 12 characters to represent Cradle Bluetooth Address
Exit and Save Configuration
Ì$-?Î
+
CONFIGURATION
15