Custom Code Identifier - Datalogic GRYPHON BT Reference Manual

Enter configuration Exit and Save Configuration
DATA FORMAT
C C I
USTOM ODE DENTIFIER
define custom code identifier(s)
Read the above code.
(Code Identifiers default to Datalogic standard, see table on previous page).
Select the code type from the code table in Appendix B for the identifier you want to
change.
You can define 1 or 2 identifier characters for each code type. If only 1 identifier character
is required, the second character must be selected as FF (disabled). Read the hexadecimal
value corresponding to the character(s) you want to define as identifiers for the code
selected in step : valid characters are in the range 00-FD.
Example: To define Code 39 Code Identifier = @
define custom code identifier(s) Code 39
Read + + +
40 FF
18