Section 2: Mechanical Assembly; Installing The Feet; Mains Transformer, Choke, And Mains Installation - Audio Note L2 Line Preamplifier Instruction Manual

Section 2: Mechanical Assembly

In this beginning section we will start by installing the 4 feet from the Fittings Bag then we will install the Mains transformer
and Choke as shown in the pictures below.

Installing the feet

Mains Transformer, Choke, and Mains Installation

Above you can see the Mains transformer that is used with the M2 Power Supply. The first step is to take the supplied M4
GND lug from the Hardware Bag and solder it to the end of the green wire.
Copyright © 2007, 2008 AudioNote Kits
www.AudioNoteKits.com
audionotekits@rogers.com
Insert 4 feet in the bottom of the chassis.
Fix them each in place using an M4 nut and washer.
Page 7