Control Panel - Recordex TechDisc Pro User Manual

User's Guide

Control Panel

Figure 1.4
The control panel provide you with an easy interface to utilize the many simple and advance features built-in to your duplci-
ator. Once you understand how the control panel buttons work you will find it easy to find the controller features you are
looking for.
Use the arrow buttons to move up or down the menu and use the ENT and ESC buttons to enter and leave sections of the
controller menu. For example if you arrow down
reveal the following menu options:
1.Copy
2.Test
3.Test&Copy P: A
4.Verify
5.Compare
6.Prescan
7.Disc Info P: A
8.Select Source
9.Image
10.Edit Track
11.Setup
Each of these menu options is called a function. Some of the functions have sub-menus which hold a number of additional
sub-functions. For example function #9, Image, has eight sub-functions. To access these sub-functions you simply press ENT
when the LCD Panel is at function 9. To return to the main menu just press ESC. For example:
9.Image
2
NOTE: Do not worry at this point about understanding what all of the functions mean. They are explained in detail
in Chapter 4: Loading An Image.
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
1. Copy
LCD Display
through the controller menu you will notice that the display changes to
P: A
P: A
P: A
P: A
P: A
9-01.Image
ENT
Load
9-02.Image
Delete Image
9-03.Image
Image Info
9-04.Image
Compare Image
Up Arrow Button
ENT
ESC
Down Arrow Button
P:A
P:A
P:A
P:A
®
Recordex TechDisc Pro
Enter Button
Escape Button
9-05.Image P:A
Select Image
9-06.Image P:A
Image Src Drive
9-07.Image P:A
ImageFormat Info
9-08.Image P:A
Edit
ESC
TM
CD
8