Recordex TechDisc Pro User Manual page 21

User's Guide
Image
The Image function, 9. Image, allows for loading, editing, renaming, moving and deleting images stored to the internal
hard drive. This section will review the options available in the Image sub-menu.
Figure 5.15
9. Image
NOTE: Press ESC to move back through the menu. This
i
is an easy way to get back to the main menu. Keep
pressing ESC until you are back to 9. Image.
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
9-01. Image P:A
Disc Info Function
Load
9-02. Image P:A
Delete Image
9-03. Image P:A
Image Info
9-04. Image P:A
Compare Image
* Not available for Audio Disc
9-05. Image P:A
Select Image
9-06. Image P:A
Image Src Drive
9-07. Image P:A
ImageFormat Info
9-08. Image P:A
Edit
Indicates Selected Partition
9-01 Image - LOAD
Insert the master disc in the top drive of the duplicator and
press ENT to load the data to the partition selected. If the
selected partition is empty the load process will start. If
ENT
the partition is not empty you will be asked if you wish to
overwrite the existing data.
9-02 Image - DELETE IMAGE
Press ENT to delete the currently selected image. The sys-
ENT
tem will ask you to confirm that you wish to delete the im-
age. Pressing ENT a second time will clear the partition.
9-03 Image - IMAGE INFO
Press ENT to display information about the selected image.
ENT
Use the Up and Down arrow buttons to scroll through the
information available.
9-04 Image - COMPARE IMAGE
Press ENT to compare the contents of the source disc in the
top drive to the contents of the selected image partition.
ENT
After the compare process is finished you may scroll
through the reported results using the UP and DOWN ar-
row buttons.
9-05 Image - SELECT IMAGE
The hard drive is divided into many partitions. Press ENT
ENT
and then use the arrow buttons to scroll through the parti-
tions. Press ENT a second time to select the partition you
wish to set as the active partition.
9-06 Image - IMAGE SRC DRIVE
This function allows you to set which disc drive will act as
ENT
the source drive for loading images to the hard drive. The
factory default is to set the top drive
9-07 Image - IMAGE FORMAT INFO
Your hard drive was formatted at the factory for CD or
ENT
DVD based on the type of unit you purchased. Press ENT
to view the Image format (CD or DVD) used.
9-08 Image - EDIT
This function allows you to name the selected partition.
ENT
Press ENT to activate the title screen and then use the ar-
row buttons to scroll through letters. Press ENT to select a
letter and then ENT again when you are finished to move to
the next menu title. You can assign a title and two sub-ti-
tles.
TM
®
Recordex TechDisc Pro CD
21