Select Source - Recordex TechDisc Pro User Manual

User's Guide

Select Source

The Select Source function, 8. Select Source, allow you to select which device will be used as the source drive. It is rec-
ommended to always make copies from the hard drive (if one is installed), especially when working with large DVD master
images. The duplicator supports copying from the hard drive (if one is installed) or from one of the DVD/CD drives. The
duplicator ships from the factor with the hard drives set as the source drive (on models including a hard drive). To change
the source simply select the Select Source function from the controller.
Pressing ENT will start enter the Select Source sub-menu. Scroll through the submenu using the arrow buttons to select the
device you wish to use as the source drive.See Figure 5.14.
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
Figure 5.13
8. Select Source
Figure 5.14
Src: HDD
05 IDE5 Master
Scroll down to view available sources
Src: SUPER MULTI
00 IDE0 Slave
Scroll down to view available sources
Src: SUPER MULTI
01 IDE1 Master
ETC.
®
Recordex TechDisc Pro
The currently selected source
device will appear first in the
list of available sources.
TM
CD
20