Recordex TechDisc Pro User Manual page 33

User's Guide
Due to the limited space available on the LCD panel it is difficult to always communicate clearly when posting an alert or
error message. For that reason we've included this list of definitions and comments.
1. Operating without Hard Drive
All data will be lost, erase?
All of the data on the re-writable disc will be lost. Proceed with erasing the disc?
Analyzing
The duplicator is checking the source disc.
Audio Disc!!! Can't compare!
The compare function will not work on Audio Discs.
Cannot read TOC
For some reason the duplicator is unable to read the contents of disc.
Check Target Please Wait
The system is checking the target devices for blank readable media.
Detect Drives
The duplicator is checking for installed drives. This includes hard drives and disc drives.
DVD-RW does not Support the Func
Some functions can not be utilized with using DVD-RW media
Erase Finished
The re-writable discs have been erased.
Erasing disc
The system is erasing the data on the re-writable disc.
Fail to get Drive Info!
The duplicator was unable to read the device information from the installed drive (I.e model#, firmware version, etc.)
Fail to get Src Disc Info!
The duplicator was unable to read the source disc information (I.e. # tracks, size of disc, etc.)
Hold ESC to exit
Press ESC for a 2 to 3 seconds to terminate the current function.
Identical
The compare test found the images to match.
Initialize SDRAM
The duplicator is initializing its internal memory.
Load Default Config?
Do you want to load the default settings?
No Erasable Disc in DVD-RW!!
The disc on the DVD-RW device is not rewritable.
Preparing
The system is preparing to record.
Press a Key to Eject Fail Disc
Press any key to eject the failed disc after copying.
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
TM
®
Recordex TechDisc Pro CD
33