Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Recordex RX-100PC
Summary of Contents for Recordex RX-100PC
- Page 1 QUICKSTART GUIDE ™ Recordex RX-100 DVD/CD AutoLoader Duplicator...
- Page 2 Serial number down in the inside cover of this quick start guide. If after reading the user’s manual you’re still having trouble with your RX-100™ then give us a call or send us a message. Service Phone: 478-237- 5501 Email: support@recordexusa.com Recordex® RX-100™ DVD/CD AutoLoader - QuickStart Guide...
- Page 3 STEP 1: Unbox and Verify Contents Verify the contents of your package against the image below. Save the box and packaging material for return shipment should your printer require service. Base Unit Input Tank Guide Rods 50-Disc Collection Tub Disc Retrieval Rod* USB Cable Power Adapter...
- Page 4 1. Connect the power cord to the power adapter. 2. Connect the power adapter to the RX-100PC. 3. Connect the power cord to the wall outlet. NOTE: Use only a grounded outlet. It is highly recommended that you pro- tect your autoloader from possible electrical damage by connecting it to a surge protector or an uninterruptible power supply (UPS).
- Page 5 Windows Explorer and open the file named autorun.exe. Figure 4.1 Installation Menu Install the device driver for your RX-100PC™. This device driver works for both XP and Vista versions of Windows. Next, install the Dexpreso BurningKit Software. Note, you will be asked to restart your computer after installing the BurningKit software, but we recommend that you wait to restart until after you’ve installed the...
- Page 6 STEP 5: Connect Your RX-100PC to your Computer Connect the small end of the supplied USB cable to the back of the RX-100PC and connect the other end to an open USB port on your computer. To Computer To RX-100 Figure 5.1 Connecting USB Cable...
- Page 7 STEP 6: Load Blank Media Into The Input Tank To fill the input tank start by placing a single disc into the input tank. This will give you a solid base to place the remainder of the blank or re-writable disc stack. The input tank can hold 50 or 100 discs depending on which input tank guide rods are installed.
- Page 8 Using The Dexpreso Software Recordex® RX-100™ DVD/CD AutoLoader - QuickStart Guide...
- Page 9 Click on a task to launch the Task Wizard. List of recently saved “burn image” projects. Log of previously processed discs. Click to set configuration options. Send commands to the RX-100PC (see below). Page 9...
- Page 10 Warranty One Year Parts & Labor and Free Technical Support RX-100PC™ Autoloader, 50 Disc & 100 Disc Input Tank Guide Rods, 50 Disc & 100 Disc Collection Tubs, Tub Holding Arm, USB Cable, Power Supply & Cord, Disc Removal Tool, QuickStart Guide, and Installation Disc (Includes Dexpreso BurningKit &...
- Page 11 Load a single disc first then add the remainder of the stack. This is much easer than trying to load the whole stack in one step. Included with your RX-100 is a handy little tool for removing discs from the output tub. Insert the disc removal tool into the stack of completed discs and then turn the output tub over.
- Page 12 If the autoloader develops a covered defect within the first year, Recordex will, at its op- tion, either repair or replace the autoloader at no charge, provided that the autoload- er is returned during the warranty period.
Need help?
Do you have a question about the RX-100PC and is the answer not in the manual?
Questions and answers