Disc Info - Recordex TechDisc Pro User Manual

User's Guide

Disc Info

The Disc Info function,7. Disc Info, provides a way to easily view basic information about source or target discs. The
duplicator will read the disc info track and report the basic information such as disc manufacturer, disc size, number of
tracks, disc format, etc. To retrieve the disc info for a source or target disc set the duplicator to Disc Info mode. To do this
simply scroll through the controller menu until you find the Disc Info function. The LCD panel should look like this:
Disc Info Function
Pressing ENT will start the Disc Info function and you will be prompted to select either the source or the target drives for
viewing disc information. See Figure 5.13.
Depending on the type of disc and the disc contents there may be more or less information displayed. Continue to press
ENT to cycle through all of the disc information. Press the DOWN arrow button to cycle through the other target discs.
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
Figure 5.11
7. Disc Info
Figure 5.12
7-01. Disc Info
Source
ENT
Source Disc
Analyzing
ENT
Disc Type:DVD-ROM
Capacity:4384MB
Blank indicates the source
P:A
is set to a disc drive, if a hard
drive is selected then a partition
will be reported, I.e. P:A
* See Select Source for more info.
The source image is 4380MB.
7-01. Disc Info
Target
ENT
Preparing......
ENT
01 Prodisc
DVD-R 16
TM
®
Recordex TechDisc Pro
0
CD
19