Recordex TechDisc Pro User Manual page 7

User's Guide
Figure 1.1: Voltage Switch
i
Use small flat head screwdriver to change
voltage switch from 115V to 230V.
WARNING: Operating the duplicator at
!
the wrong voltage setting will damage the
duplicator. Make sure that voltage setting
matches the power requirements for the
region of the world where the duplicator is
operated.
Your Duplicator
Study the image below to familiarize yourself with your duplicator.
Figure 1.2
Master Drive*
Target Drives
Figure 1.3
Power Switche
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
Controller
{
Power Plug
TM
®
Recordex TechDisc Pro
Side Air Vent
Stabilizing Feet
Cooling Fans
Side Air Vent
CD
7