Auto Start; Auto Verify; Auto Compare - Recordex TechDisc Pro User Manual

User's Guide
Setup
The Setup menu, 11. Setup, contains several system setup functions. For the most part it is not necessary to change any of
the setup options as they are set to the factory preferred configuration prior to shipping.
Figure 5.19
11. Setup
11-03.Setup
Read Speed
11-04.Setup

Auto Start

11-05.Setup
Startup Menu
11-06.Setup

Auto Verify

11-07.Setup

Auto Compare

©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
11-01.Setup
Disc Info Function
Language
11-02.Setup
CD Burn Speed
Continue on next page.
11-01 LANGUAGE
Choose from several language options.
11-02 CD BURN SPEED
Select burn speed from 1x to 48x or select Auto. Auto is the
recommended setting.
11-03 READ SPEED
The factory default is Maximum. If you experience problems
with failed copies you may want to select a slower burn speed.
11-04 AUTO START
This feature is turned off by default, but if enabled the system
will automatically start the copy or test process after blank me-
dia is inserted. The options, 1 through 7, refer to how many
blank discs must be inserted before the system will auto start.
11-05 STARTUP MENU
This function allows you to pick a function and make it the first
function listed on the menu. Scroll through the menu options and
select one by pressing ENT. The next time you turn on your du-
plicator the function you selected will be listed in the #1 posi-
tion on the menu.
11-06 AUTO VERIFY
When turned on the auto verify function will check target discs
after they have been burned to verify that they are able to be
read in a standard player. The default setting is off.
11-07 AUTO COMPARE
When turned on the auto compare function will check target
discs after they have been burned and compare them to the
source disc. Any differences, if found, will be reported. The
default setting is off.
TM
®
Recordex TechDisc Pro CD
25