Burn Mode; Device Info; System Info - Recordex TechDisc Pro User Manual

User's Guide
Figure 5.20
11. Setup
11-08.Setup
Auto Prescan
11-09.Setup
Eject Disc
11-10.Setup
Burn On The Fly
11-11.Setup

Burn Mode

11-12.Setup
Display Time
11-13.Setup
Button Sound
11-14.Setup

Device Info

11-15.Setup

System Info

11-16.Setup
Quick Erase
©2007 Recordex USA, Inc. All rights reserved.
Version: 1.2
Disc Info Function
Continue on next page.
11-08 AUTO PRESCAN
When turned on the auto prescan function will check source discs
before starring a the copy process to verify that the disc is
able to be read. The default setting is off.
11-09 EJECT DISC
This setting determines whether a disc is ejected at the end of a
copy or test cycle. The default setting is to eject only the discs
that have successfully copied (Eject Good Only). The available
options are: Good Only, All Disc, Do Not Eject.
11-10 BURN ON THE FLY
This setting when enabled allows direct copying from a CD or
DVD. If turned off the duplicator will first copy the data from
the source disc to the hard drive and then copy from the hard
drive to the target discs. Copying from the hard drive is more
reliable but not always as convenient.
11-11 BURN MODE
This setting switches the burn mode between TAO (Track-at-
Once) and DAO (Disc-at-Once). In most cases the duplicator
will automatically switch modes if the selected mode is not com-
patible with the disc.
11-12 DISPLAY TIME
Enabling this setting will cause the elapsed time to be dis-
played after a copy or test process is complete.
11-13 STARTUP MENU
If desired the button sound can be turned off by changing this
setting.
11-14 DEVICE INFO
The controller is able to report on the model number and firm-
ware version of each device inside the duplicator. To access
this information select Device Info and scroll through the devices.
Pressing ENT will display details for each device.
11-15 SYSTEM INFO
To view the duplicator model number and firmware revision
select System Info and scroll through the available data.
11-16 QUICK ERASE
The duplicator is capable of performing a quick erase function
on any re-writable disc. Simply place re-writable media that
you wish to erase in the target drives and select the Quick
Erase function. The media will appear blank. NOTE: The data
is not truly erased but the discs can now be used as blank me-
dia. To fully erase a disc use the Full Erase function.
TM
®
Recordex TechDisc Pro CD
26