Cable Installation - Pyramid TIMETRAX BIO Reference Manual

TIMETRAX BIO

CABLE INSTALLATION

PARTS REFERENCE
A
Central PC
B
RJ45 to DB9 Adapter (PN 41400)
C
USB to RS232 Adapter (PN 41685)
D
50' White Flat Cat5 Cable (PN 41269)
CONNECTING POWER: Connect the AC power supply (fig. F) to a standard
115v wall power outlet (fig. G) and also to the TimeTrax Bio unit (fig. E).
Two available options for connecting the TimeTrax Bio to your central PC.
(fig. A)
OPTION 1: PC has an available Serial 9-pin (COM) port.
Connect the white 50' RJ45 cable (fig. D) to the RJ45/DB9 adapter (fig. B).
This will then connect to the back of your PC. (fig. A)
OPTION 2: PC only has a USB port. **Important** Make
sure the TimeTrax software is pre-installed prior to any
hardware and cable connections.
Connect the white 50' RJ45 cable (fig. D) to the RJ45/DB9 adapter (fig. B)
and then connect the RS232/USB adapter (fig. C) to the back of your PC
(fig. A).
2
A
B
C
D
OPTION 1
OPTION 2
D
B
F
E
TimeTrax Bio (PN TTBIO)
F
AC Power Supply (included in
shipping)
G
Standard 115v Wall Power Outlet
E
G