TIMETRAX™ SYNC RF WIRELESS ANALOG CLOCK Installation Instructions OVERVIEW Thank you for choosing a TimeTrax™ Sync RF Wireless Clock System. The TimeTrax™ RF Wireless Clock System receives dependable, accurate time from the TimeTrax™ Sync RF Wireless Transmitter. IMPORTANT: Prior to clock installation, install TimeTrax™ Sync RF Wireless Transmitter and complete software set-up (part #9T1WI or S9DWXSLAUB sold separately).
Page 2
TIMETRAX™ SYNC RF WIRELESS ANALOG CLOCK Installation Instructions (cont.) WIRED MODELS WIRING SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN AND IN COMPLIANCE WITH ELECTRICAL CODE. Install metal security bracket onto a standard electrical box. Make electrical connections. This should only be performed by a licensed electrician. Push clock onto security bracket aligning four tabs on bracket with four matching slots on back of terminal.
Page 3
TIMETRAX™ SYNC WIRELESS RF ANALOG CLOCK Installation Instructions (cont.) SPECIFICATIONS Time Base Microprocessor Time Update Every 20 seconds (wired) Frequency Every 24 hours (2am) (battery-operated) Method 902-928 MHz (frequency-hopping technology) BATTERY AC POWER 120/240 AC Power Input 3.6 Volt Lithium 105-265V AC 50/60Hz Average Power 0.066 Watts...
Page 4
Failure caused by accident, alteration, misuse or improper packaging of returned unit is not covered by this Warranty. Any repair to equipment other than by Pyramid voids the Warranty. Users in territories other than USA, Canada, South America & Australia should contact the Dealer from whom the unit was purchased. The rights under this Warranty are limited to original user and may not be transferred to subsequent users.