Advertisement
Quick Links
TIMETRAX™ SYNC RF WIRELESS DIGITAL CLOCK
Installation Instructions
OVERVIEW
Thank you for choosing a TimeTrax™ Sync RF Wireless Clock System. The TimeTrax™ RF Wireless Clock System
receives dependable, accurate time from the TimeTrax™ Sync RF Wireless Transmitter.
IMPORTANT: Prior to clock installation, install TimeTrax™ Sync RF Wireless Transmitter and complete software
set-up (part #9T1WI or S9DWXSLAUB sold separately).
IMPORTANT: WIRING SHOULD BE COMPLETED PER ELECTRICAL CODE AND PERFORMED BY A LICENSED
ELECTRICIAN. Before clock installation, please remove security bracket from back of clock (see instructions below).
For more information, visit pyramidtimesystems.com or call our technical support team at 888.479.7264 during
regular business hours: 8am-5pm EST, M-F.
SECURITY BRACKET REMOVAL
Prior to installation, detach metal security bracket from clock by inserting included release key into slot
located on back of clock.
Push key all the way into slot. Key will slide easily until some resistance from locking tab is felt.
With key fully engaged, slide the security bracket down and off of the clock.
ETHERNET
I2255
Page 1 of 5
888.479.7264
pyramidtimesystem.com
Advertisement
Related Manuals for Pyramid TIMETRAX SYNC RF
Summary of Contents for Pyramid TIMETRAX SYNC RF
-
Page 1: Installation Instructions
TIMETRAX™ SYNC RF WIRELESS DIGITAL CLOCK Installation Instructions OVERVIEW Thank you for choosing a TimeTrax™ Sync RF Wireless Clock System. The TimeTrax™ RF Wireless Clock System receives dependable, accurate time from the TimeTrax™ Sync RF Wireless Transmitter. IMPORTANT: Prior to clock installation, install TimeTrax™ Sync RF Wireless Transmitter and complete software set-up (part #9T1WI or S9DWXSLAUB sold separately). - Page 2 TIMETRAX™ SYNC RF WIRELESS DIGITAL CLOCK Installation Instructions (cont.) WIRED MODELS WIRING SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN AND IN COMPLIANCE WITH ELECTRICAL CODE. Install metal security bracket onto a standard electrical box. Make electrical connections. This should only be performed by a licensed electrician. Push clock onto security bracket aligning four tabs on bracket with four matching slots on back of terminal.
- Page 3 TIMETRAX™ SYNC RF WIRELESS DIGITAL CLOCK Installation Instructions (cont.) BATTERY MODELS (LCD) Install metal security bracket onto a standard electrical box, or if not using electrical box, hold security bracket flush against wall, level & mark four screw holes close to corner tabs. Drill holes as marked and secure bracket to wall using provided screws and wall anchors.
-
Page 4: Specifications
TIMETRAX™ SYNC RF WIRELESS DIGITAL CLOCK Installation Instructions (cont.) SPECIFICATIONS Microprocessor Time Base AC POWER & CORD LCD BATTERY Time Update Every 20 seconds Every 24 Hours (2am) Frequency Method 902-928 MHz frequency-hopping technology FLYING LEAD CORD LCD BATTERY 105/240 VAC (2) 3.6 Volt Power Input or 24/36... -
Page 5: Year Limited Warranty
Failure caused by accident, alteration, misuse or improper packaging of returned unit is not covered by this Warranty. Any repair to equipment other than by Pyramid voids the Warranty. Users in territories other than USA, Canada, South America & Australia should contact the Dealer from whom the unit was purchased. The rights under this Warranty are limited to original user and may not be transferred to subsequent users.