TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions OVERVIEW Thank you for choosing a TimeTrax Sync™ 7000/7000BDL110 Master Clock System. The TimeTrax Sync™ 7000/7000BDL110 synchronizes up to 200 TimeTrax Sync™ Analog Clocks (part #5200) and/or Digital Clocks (part #DIG-4B, DIG-6B 41357G, 61357G). The system can provide power to eight TimeTrax Sync™...
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions 7000/7000BDL110 MASTER CLOCK CONTROLLER : FEATURES 7000 7000BDL110 200 TimeTrax Sync™ Analog and/or 200 TimeTrax Sync™ Analog and/or Synchronization Capacity Digital Clocks Digital Clocks Synchronization Distance Up to 300 feet Up to 300 feet Analog Clock Power Up to 8 Analog Clocks (part #5200) Up to 8 Analog Clocks (part #5200)
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions WALL MOUNTING Use key to unlock and open front cover. Select a location for mounting. Power outlet should be within 5 feet of mounting location. With door, open, hold the case in desired location and mark holes for drilling.
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions INSTALLATION/7000 Route the power supply through cable channel located on right side or bottom of the 7000 case. Connect power supply into power port labeled POWER. Plug power supply into standard electrical wall outlet. SELECT SET-UP INSTRUCTIONS To change or set feature,...
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions PROGRAMMING SELECT SET-UP INSTRUCTIONS To change or set feature, After displayed feature is press SELECT until desired changed, press SELECT to feature is displayed. 24 VDC change other feature & return to main display. to change feature.
Page 9
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions 7000 MASTER CLOCK CONTROLLER : PROGRAMMING FeATure (SeLeCT) DiSpLAy DeFAuLT SeTTing OpTiOnS (SCrOLL st) Schedule Bells NO: No event(s) scheduled. YES: Schedule event(s) SET EVENT #1-300 See instruction on p.12. Date Format Use the UP or DOWN key to select USA or EURO (European) display format for time.
Page 10
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions CLOCK CONNECTION Using RJ45 BCD Cable, connect one end of the cable to the 7000 port labeled DATA and route cable through cable channel located on the right side or bottom of 7000 case. Connect the other end of the RJ45 cable to port located on back of Analog or Digital clock.
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions CLOCK CONNECTION Use RJ45 Splitter Cable (part # 41270) to add more clocks. Up to 200 clocks may be added to the system, however clocks should be located within 300 feet of 7000 unit to receive the synchronization time data.
7000 case. A total of 35 bells or 20 Horns can be connected SELECT to the circuit if using Pyramid bells SET-UP INSTRUCTIONS (part #41361, 41392) and horns (part To change or set feature,...
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions SET EVENT MENU : SET EVENT SCHEDULE AN EVENT (e.g. Sound Bells/Horns) FeATure (SeLeCT) DiSpLAy DeFAuLT SeTTing OpTiOnS (SCrOLL Set event Scroll (UP) or (DOWN) to Schedule schedule event Assign the SET EVENT event a (e.g.1, 2, 3 ...
Page 14
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions SPECIFICATIONS 7000 SPECIFICATIONS Time Set Manual Power Output 800mA BCD Time Updates Up to 200 clocks, 35 bells, 20 horns and powers up to 8 Analog Clocks (Part #5200) using RJ45 Operating Temp -30°F (-34.44°C) to 130°F (54.44°C) Display LCD, date &...
TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL Installation Instructions ACCESSORIES pArT # DeSCripTiOn DIG-4B 4” x 4-digit Red LED Independent Digital Clock DIG-6B 4” x 6-digit Red LED Independent Digital Clock 41357G 4” x 4-digit Red LED Digital Clock 61357G 4” x 6-digit Red LED Digital Clock 5200 13”...
1 year from date of purchase. The manufacturer’s responsibility under this Warranty is limited to repair or replacement of defective part or parts. Pyramid reserves the right to determine whether parts failed because of defective material, workmanship, or other causes. Failure caused by accident, alteration, misuse or improper packaging of returned unit is not covered by this Warranty.
Need help?
Do you have a question about the TIMETRAX SYNC 7000 and is the answer not in the manual?
Questions and answers