Installation - Pyramid 2650 User Manual

AUTO ALIGNING TIME CLOCK INSTRUCTIONS
Model 2650
DESKTOP SET UP
1
Remove time clock from carton & place on a flat, level surface.
2
Plug unit into AC wall outlet.
WALL MOUNTING
1
Select a location convenient to employees
clocking IN & OUT. Be sure power outlet is
within 5 feet of mounting location.
2 Use masking tape to hold mounting template
on wall, making certain template is positioned
so bottom of time clock is approximately
45 inches from floor.
3
Drill holes using template as a guide.
4
Remove template from wall & install #10 screws,
leaving approximately 3/16 inch of screws
exposed. For sheetrock walls, use plastic
anchors.
5
Hang time clock on wall, aligning keyholes on the
rear with screw heads. Press downward on time
clock until it lowers onto screws.
6
Plug unit into AC wall outlet.
4

INSTALLATION

Model 2650
888.479.7264