Spark Plug - Gilera Runner RSTPurejet Service Manual

Maintenance
Brake fluid level - check
Coolant level - check
Transmission elements - lubrication
Safety locks - check
Suspensions - check
Electrics - Check
Headlight - adjustment check
Tyre pressure and wear - check
Vehicle and brake test - road test
Hub oil level - Check / Replace
Spark plug - replacement
Fuel filter - replacement
Air filter - clean
Transmission gas mixer- adjust
Driving belt - replacement
Variator rollers- Check wear
Mixer belt - replacement
Steering - adjustment
Brake control levers - greasing
Brake pads - check condition and wear
Brake fluid hoses - replacement
Brake fluid level - check
Coolant level - check
Transmission elements - lubrication
Safety locks - check
Suspensions - check
Electrics - Check
Headlight - adjustment check
Tyre pressure and wear - check
Vehicle and brake test - road test

Spark plug

- Disconnect the lug of the spark plug and remove
it.
- Examine it carefully and if the insulation coating
is splintered or damaged, replace it.
- Measure the distance between the electrodes
using a feeler gauge and if necessary regulate it
by carefully bending the external electrode.
- Ensure the seal washer is in good condition.
- Fit the spark plug, screw it on by hand and secure
it with a spark plug spanner to the prescribed tor-
que.
MAIN - 4
Action
AT 60,000 KM
Action
Runner RST Purejet