Gilera Runner RSTPurejet Service Manual page 139

Runner RST Purejet
pure jet injection
Select «RESET TPS» from the menu. By using this procedure, the following indications are visualised.
GO TO point 2
2. Check for possible errors
Wait
GO TO point 3
GO TO point 4
3. Errors present
Cancel all errors
Press a key
GO TO point 5
4. No errors
Press a key
GO TO point 6
5. Check the auto-diagnostic content and make the necessary repairs
GO TO point 1
6. TPS reset in process
Wait
GO TO point 7
7. Key «OFF»
Press a key
GO TO point 8
8. Check the abut of the throttle body
Push OK to proceed
GO TO point 9
9. Wait
GO TO point 10
10. Key on «ON»
Press a key
GO TO point 11
11. Wait
GO TO point 12
12. Check for possible errors
Wait
GO TO point 13
13. No errors
Press a key
GO TO point 14
14. Wait
INJ PJ - 27