Fuel Tank; Front Mudguard - Gilera Runner RSTPurejet Service Manual

Chassis

Fuel tank

- Remove the central chassis cover.
Remove the side fairings and the helmet compart-
ment.
- Remove the screw <C> indicated in the figure at
both sides.
- Remove the bolt <A> and loosen the nut <B>in-
dicated in the figure.
- Lift the chassis very gently, being careful with the
cables affixed to it.
- Disconnect the electrical connections and the
fuel tank pipes when extracting the chassis.
N.B.
this operation should be preferably be carried out
with the tank empty.
See also
Frame central cover
Side fairings
Helmet bay

Front mudguard

Loosen the four screws fixing the fender to the
fork.
CHAS - 10
Runner RST Purejet